Buy Online

Meter Units
Control Units
 

Browse By Type

Automatic Pumps
Pneumatic Pumps
Manual Pumps
Proportioning Devices
Manifolds
Specialty Systems
Controllers
Accessories
 

Helpful Links

Industeq Online Cart
Industeq Main Site
Bijur Main Site
 
Home >> Products >> Automatic Pumps >> SureFire SLR Automatic Lubricator

SureFire SLR Automatic Lubricator We currently do not offer this product for sale on our online shopping cart. For quotes and ordering information, please call us at (281)565-8600.
Main  >> System Description  >> How It Works  >> Technical Specifications

How It Works
When power is supplied to the motor (via either an on-board timer on controller or by customer-supplied power) the motor runs the gear pump. As the motor turns, the gear pump pulls lubricant in from the reservoir and delivers pressurized lubricant to the distribution network via the outlet(s) in the top plate. Pressurizing the distribution network forces all the resistance fittings in the system to open, allowing lubricant to flow to the friction points. The resistances fittings continue to flow and the pump builds pressure until pressure relief valve setting is reached (75psi). Once the motor is shut off, pressure in the distribution network returns to near 0psi. This actuates a quick dump valve which relieves the line pressure back into the reservoir.

Technical Specifications
Output volume - 115VAC, 230VAC (max.) 200cc/min @ 60Hz (167cc/min @ 50Hz)
Output volume - 24VDC (max.) 250cc/min
Output volume - Three phase (max.) 200 or 500cc/min @ 60Hz; 167 or 415cc/min @ 50Hz
Output pressure (max.) 5 bar (75psi)
Pressure switch resetting Optional, closes at 1.4 ±0.3 bar (20 ±5 psi)
Lubricant viscocity Oil: 20 to 1500 cp
Reservoir fill screen (oil only) 40 mesh, removable
Reservoir volume 1.8 Liter, 2.7 Liter, 6.0 Liter, 12.0 Liter
Reservoir material Clear ABS Plastic for 1.8, 2.7, and 6.0L, Steel for 12.0L
Motor Voltage Options 115VAC, 230VAC, 50/60 Hz, 24VDC (single phase)
230/415VAC 50 Hz, 260/480VAC 60 Hz (three phase)
Motor power requirements Approximately 140W
Operating temperature range +5°C through +40° C (+40°F through +105°F)
IP rating IP-54
Electrical fitting Liquid tight
Output connection G 1/4 BSPP
Single (main) feed line 6mm OD minimum recommended